Chemical Earthing System (CES)
Shielded Tape-in-Pipe / Pipe-in-Pipe technology for stable, low-resistance earthing in all soils and seasons.
Request QuoteAs a leading OEM we manufacture every component required for installation as per IS/IEC 62305 — each tested to the IEC 62561 series. Tap any image to enlarge.
Shielded Tape-in-Pipe / Pipe-in-Pipe technology for stable, low-resistance earthing in all soils and seasons.
Request Quote
High-tensile low-carbon steel molecularly bonded with 99.9% pure electrolytic copper, per UL. Multiple shapes and custom lengths.
Request Quote
Maintenance-free electrode with uniform copper coating for the lowest resistance to ground and long service life.
Request Quote
Galvanised iron electrode for cost-effective, reliable grounding in commercial and industrial installations.
Request Quote
Copper plate, crow-foot and super-reliable earth kits with brass grounding accessories for every soil condition.
Request Quote
Highly conductive copper-clad steel conductor for down-conductors and grounding networks.
Request Quote
Rapid-deployment, portable grounding system for temporary substations, mobile DG sets, telecom towers, defence and tactical installations.
Request Quote
Premium conductive concrete earthing compound engineered for permanent, low-resistance grounding in high-resistivity rocky, sandy and difficult terrains.
Request Quote
Metallurgical carbon with Portland cement for electrical earthing systems. Resistivity below 0.15 Ohm metre. 25 kg bag.
Request Quote
Calcined carbon with graphite for lightning protection and electrostatic earthing. Resistivity below 0.18 Ohm metre. 25 kg bag.
Request Quote
Natural salt mix with graphite for LV AC/DC and data systems, as per Motorola R56. Resistivity below 0.2 Ohm metre. 25 kg bag.
Request Quote
Non-soluble, hygroscopic, thermal-insulating backfill. RoHS approved and environmentally friendly, with batch certificates.
Request Quote
High-density polypropylene earth pit covers — light, durable, UV-stable and readymade to avoid on-site masonry work.
Request Quote
Cross-connectors, expansion pieces, rod clamps, inline connectors and conductor holders for air-termination and down-conductor systems.
Request Quote
Heat-shrink, cold-shrink and pre-moulded joints, terminations and accessories up to 66 kV as per IEC-60502-4 / IS-13573.
Request Quote
High-quality insulated Cadmium Bronze Cable conforming to RDSO specification for railway and signal electrical continuity.
Request Quote
Lightning interception rod in Aluminium, Copper, GI or Stainless Steel, available in 1000 / 2000 mm lengths with full mounting hardware.
Request Quote
Early Streamer Emission terminal meeting NFC 17-102, UNE 21186 and IEC 62305. Withstands multiple 40 kA impulses; 5-year warranty.
Request Quote
Multiple sharp stainless-steel points on an Aluminium / SS mast dissipate ions, preventing charge accumulation and upward streamers.
Request Quote
Records surge events on the down-conductor to support inspection, verification and regulatory compliance.
Request Quote
Durable lead-coated copper air terminal and hardware for long-life lightning protection installations.
Request Quote
Solid unthreaded aluminium interception rod Ø16/10 mm, 1000 / 2000 mm length. Engineered for wind loads up to 130 km/h; compatible with FangFix stand system.
Request Quote
Compensates for temperature-related expansion and contraction on long conductor runs exceeding 20 metres. Made from Ø8 mm round aluminium conductor (ca. 400 mm span).
Request Quote
Heavy-duty cross-connector meeting VDE 0185-305-3 and IEC/EN 62305-3. Joins Rd 8-10 mm down-conductor to Rd 16 mm rod with 4 × M8×25 hex bolts and nuts.
Request Quote
Engineered holder for Ø8/10 mm AL conductors with insulating/metallic base designed for metallic standing-seam and corrugated sheet roofs. Conductor elevation: 30 mm.
Request Quote
300×300×2 mm aluminium mounting base plate for Ø10/16 mm interception rods on RCC and concrete rooftop blocks, with heavy-duty rod-to-conductor clamps.
Request Quote
Ø8 mm round aluminium down-conductor with 50 mm² cross-section compliant with DIN EN 62561-2 (TPTARC-8-AL), supplied with 8-10 mm inline sleeve connectors (TPTIC-8-AL).
Request Quote
Type 1 SPD for main distribution boards. limp 100 kA, low clamping (Up below 2.5 kV), IP 20 enclosure.
Request Quote
Combined lightning and switching surge arrester. Imax 60 kA, limp 25 kA, with tight nominal clamping levels.
Request Quote
Type 2 SPD for sub-distribution boards protecting sensitive electronic equipment from switching transients.
Request Quote
Point-of-use protection for data, communication and control networks and individual power outlets.
Request Quote
BDL-PVT 440 V surge protection for photovoltaic systems, plus dedicated LED surge protectors.
Request Quote
High-density graphite moulds with a unique design for high performance, long life and permanent molecular bonds.
Request Quote
High-quality copper-oxide and aluminium mixture weighed in grams, supplied as complete weld kits for copper-to-copper / steel joints.
Request Quote
Surveillance cameras across ranges and brands — supplied and installed with DVR / NVR and full commissioning.
Request Quote
Free-standing air-termination mast system suitable for wind loads up to 130 km/hr, with Frang Fix stand options.
Request Quote
Our own rack range for DVR, networking equipment and servers — different sizes for safe, organised installation.
Request QuoteKey technical details from our data sheets. Click any brochure page to enlarge.
We customise rods, electrodes, terminals and moulds in the shortest possible time. Share your requirement for a quick quotation.